Getting Started Guide

for PC Access

Setting Up PC Access

If this is the first time you are running PC Access, it displays the Register PC Access for Windows window.

1. Complete each field on the Register PC Access for Windows window. You can press the Tab key to move from field to field. When you finish, click OK. After you click OK on this window, you cannot change the information you entered. If you are unsure about any of the information, click Cancel and run PC Access again later.
   
   
2. After you click OK on the Register PC Access for Windows window, PC Access displays the Backing Up License File window. Make sure Disk 1 is in the diskette drive and click OK. PC Access will create a back up copy of your registration information. When you finish, PC Access will display the Installation Assistant window.

   

3. The installation assistant will walk you through setting up PC Access. Click the Basic button to set up your Agent, MLS, and modem information.

   

4. In the Phone # to Dial field on the MLS Setup window, type the phone number to your MLS system. If you need to dial a number to access an outside line, include that number in the Phone # to Dial field. You may need to add a comma after the number. For example: 9,555-1234. If you do not know the phone number to the modems at your MLS office, contact your MLS.

   If you connect to your MLS system via your Internet connection, you still need to enter a phone number in the Phone # to Dial field. Enter any phone number in this field to continue setting up PC Access. Follow the rest of the instructions in this section to setup your agent and modem information. When you finish, see: Set up your Internet Connection to set up PC Access to connect to your MLS via your Internet connection.

   In the Speed group select a connection speed. We recommend setting it at 19,200. It is best to start out with a slow speed to make sure everything is working properly.

   In the Emulation group, select the type of system your MLS uses. If PC Access prompts you to update Speed Buttons, click Yes.

5. When you finish, click Next.

   

6. On the Agent Setup window, enter your name, MLS login name, and MLS password. You can enter your name in this format: Seller, Sally. When you finish, click Next. If you do not know your MLS login name and/or your MLS password, contact your MLS.

   

7. On the Modem Setup window, click the Wizard button to display the Modem Wizard window. Select your modem from the list and click OK on the Modem Wizard window. The Modem Wizard is not compatible with Windows NT 4.0, 2000 or XP. If you are using one of these versions of Windows, you need to manually select your COM port.

   If the Modem Wizard cannot determine which COM port your modem is on; or if the Modem Wizard is not compatible with your version of Windows, you will have to manually select your COM port. To manually select your COM port, select COM 1 and click Test. If your modem is on COM 1, PC Access will display the Modem Test Complete window. If your modem is not on COM 1, PC Access will display the Modem Not Responding window.

   You need to continue selecting COM ports and clicking the Test button until one of the COM ports passes the modem test.

8. When you finish, click Done.
   
   
9. After you click Done, PC Access will display the Main Menu window. You are now ready to dial your MLS! See: Dialing in for the First Time for assistance.

More:

Set up your Internet Connection

Last modification date: Friday, January 17, 2003 00:58:30