Pick

Click this to display the Modem Selection window. It contains a list of modems for which PC Access has pre-configured settings. If you find your particular brand of modem in the list, select it. When you do, these advanced modem setup fields will automatically update: Dial Command, Reset Command, and Default Initialize Command. If your modem is not on the list, select the Generic V.32 & V.32bis entry.

· Note: most modems work fine with the Generic V.32 & V.32bis entry. If you get an error initializing your modem when you click the Test button, try choosing the Generic V.32 & V.32bis entry and click the Test button again.

· On the other hand, some modems require a special Default Initialize Command to enable necessary features like hardware flow control. If you can find your modem on the list, you should select it.

Setup item classification:· Parent window: Modem Setup

· Setup item type: Advanced

· Who specifies: You

· Importance: Optional