Printer capture is not available for BORIS Maestro System and Master System users. Therefore your Print Capture Settings on the Add/Edit Agent window have no effect for these Emulations.
Disk capture is now available for Maestro System users in PC Access version 4.10.
Disk capture is available for Master System users. If you use disk capture with a Master or Maestro System host, select Capture Everything for your Disk Capture Settings. Do not select Smart Capture on the Add/Edit Agent window, and do not check the File | Smart Capture menu item on the Terminal window.
Disk capture from a Master System or Maestro System host has these limitations:
· PC Access captures only information that displays on the Terminal window screen. This usually excludes most or all of the text when you autoprint a host report. If you want to capture the text in a host report, set up a Generic Text Only printer in the Windows Control Panel and direct the output to a file. Add this printer to the Printer Setup window. Then either Set it as your PC Access default printer, or select this printer from the Terminal window.
· PC Access is unable to capture photos to the disk capture file. However, you can print photos and save them to several other kinds of files:
¨ Select a host-initiated report that includes photos;
¨ Click the Print Screen button on the Terminal window while a photo is visible;
¨ Capture a Terminal screen to a slide show file and print it from the Slide Show Accessory; or
¨ Save, Print, or Copy a photo from the Photo Commands speed menu.