PC Access Does Not Automatically Install From the CD-ROM

Quick Contents

Introduction

If your PC Access CD does not automatically run when you insert it into your CD-ROM drive, you may not have the AutoPlay feature enabled. To enable Windows AutoPlay see: How to Enable Windows AutoPlay.

If you would like to install your PC Access CD-ROM without the use of AutoPlay, see: How to Install PC Access from the CD-ROM.

How to Enable Windows AutoPlay

• Article ID: Q177880
• CD-ROM Does Not Run Automatically When Inserted

How to Install PC Access from the CD-ROM

1. Insert the PC Access CD-ROM into your CD-ROM drive.
2. Click Start | Run.
3. In the Run window, next to Open: type the following command:
   • Note: If your CD-ROM drive is not D:\, substitute the letter of your CD-ROM drive in the following instructions.

       D:\SETUP.EXE
      

   • Note: If the command above is unable to install PC Access, type:

           D:\SETUP\SETUP.EXE
          

   click OK to begin the installation process.
4. Follow the instructions on your screen to install PC Access.
   • Note: When you finish installing PC Access from the CD-ROM, PC Access will prompt you to install your User Authorization. Use your PC Access Disk 1 to install your User Authorization

Related Information

• What is the Windows Start Button?
• How to Determine Your Windows Version
• User Authorization
• PC Access Disk 1

If you need further assistance, please complete the PC Access for Windows Problem Report Form.

Last modification date: Tuesday, May 6, 2003 15:22:06